Home / Products / Aluminum High-Pressure Die Casting
Main Products
Aluminum High-Pressure Die Casting
Fast, precise, thin-wall die castings for high-volume aluminum parts.
- ISO 9001 certified
- DFM feedback in 48 h
- Machined & inspected in-house
Start a New Die Casting Quote
Upload Drawings & Get a QuoteSTEP · STP · IGES · X_T · DWG · DXF · PDF · ZIP
All uploads are secure and confidential.
Overview
High-pressure die casting (HPDC) injects molten aluminum into a hardened steel die at high velocity and pressure. It delivers net-shape parts with thin walls, fine detail and tight as-cast tolerances at the lowest unit cost — the best choice for medium to high annual volumes.
Best suited for
- Thin-wall housings, covers and enclosures
- Heat sinks and LED / electronics housings
- Net-shape parts with minimal machining
- Annual volumes from 5,000 to several hundred thousand pieces
- Parts that need consistent cosmetic surfaces for coating

Capabilities at a Glance
| Typical alloys | A380, ADC12, A383, AlSi9Cu3, AlSi10Mg |
|---|---|
| Machine range | Cold-chamber die-casting cells (tonnage to be confirmed per project) |
| Typical part weight | 0.02 – 10 kg |
| Wall thickness | Down to 1.5 – 2.0 mm (process characteristic) |
| As-cast tolerance | ISO 8062 CT5 – CT7 (typical for process) |
| Surface finish | Ra 1.6 – 3.2 µm as cast |
| Secondary | Trimming, CNC machining, vibratory deburring, powder coat, e-coat, anodizing, impregnation |
| Industries | Automotive, electronics & LED lighting, telecom, power tools, appliances, HVAC |
Tolerance and finish values are typical for the process; final values are confirmed per drawing.
Examples
Aluminum High-Pressure Die Casting Parts We Produce

Brake Master Cylinder Body
Die cast body with precision-machined bore and ports.

Pump Body
Compact pump body with integrated mounting flange.

Radial Heat Sink
Thin-fin LED heat sink cast to net shape.

Mounting Plate
Flat plate with pockets and bosses, machined on 3 faces.

Motor Housing Cup
Cup-shaped housing, machined and finished.

Assorted Die Castings
Brackets, heat sinks and covers from a single production program.
FAQ
What tooling lead time should I expect?
Die design and build typically takes 5–8 weeks depending on complexity, followed by T1 samples. Exact timing is confirmed with each quote.
Can die castings be heat treated or welded?
Conventional HPDC parts contain entrapped gas and are generally not T6 heat treated or welded. If you need those properties, consider low-pressure or gravity casting.
Other capabilities
Get a quote for aluminum high-pressure die casting
Send your 2D drawing or 3D model. Our engineers review every RFQ and reply with DFM feedback and pricing within 48 hours.