Home / Case Studies
Real Projects
Case Studies
Examples of cast and machined parts from our production, with the process route used for each.

Aluminum Gearbox Housing — Gravity Casting + Machining
Thin-wall housing with internal ribs. Bearing bores and mating faces are machined in one setup after heat treatment to hold concentricity.
- Industry
- Power transmission
- Material
- A356-T6 aluminum
- Process
- Permanent-mold gravity casting with sand cores; T6 heat treatment; CNC machining of bearing bores and mating faces

Motor End Cover — Low-Pressure Casting
Ribbed dome-shaped cover. Bottom-fill low-pressure casting keeps the radial ribs sound and gives a smooth surface for painting.
- Industry
- Electric motors
- Material
- A356-T6 aluminum
- Process
- Low-pressure die casting; T6; machined spigot and bolt holes

Brake Master Cylinder Body — High-Pressure Die Casting
Near-net-shape die casting keeps machining stock low; the bore and ports are precision machined and parts are impregnated for leak tightness.
- Industry
- Automotive aftermarket
- Material
- A380 aluminum
- Process
- HPDC; impregnation; precision CNC boring and port machining

Radial LED Heat Sink — High-Pressure Die Casting
Thin radial fins are cast to final shape, so only the mounting features need light machining.
- Industry
- Lighting
- Material
- ADC12 aluminum
- Process
- HPDC to net shape; deburring; powder coating

Control Arm — Ductile Iron Sand Casting
One-piece ductile iron arm with cast-in lightening holes; bushing bores are machined to drawing tolerance.
- Industry
- Vehicle suspension
- Material
- Ductile iron 65-45-12 (ASTM A536)
- Process
- Green-sand casting; shot blasting; machined bushing bores; e-coat

Heavy-Duty Mounting Bracket — Iron Casting
Heavy-section bracket with machined mounting faces and a drilled bolt pattern for direct assembly.
- Industry
- Industrial equipment
- Material
- Ductile / gray iron
- Process
- Resin-sand casting; machined mounting faces and drilled pattern; painted

Control Levers — Steel Investment Casting
Near-net-shape investment-cast levers; pivot bores are machined after heat treatment.
- Industry
- Agricultural machinery
- Material
- Low-alloy steel, quenched & tempered
- Process
- Investment casting; Q&T heat treatment; machined pivot bores

Twin-Eye Link Arm — Steel Casting + Machining
Both eyes are machined in a single fixture to hold center distance and parallelism.
- Industry
- Industrial machinery
- Material
- Carbon steel
- Process
- Investment casting; CNC machining of both eyes to tight center distance
Have a similar part?
Send your 2D drawing or 3D model. Our engineers review every RFQ and reply with DFM feedback and pricing within 48 hours.