Home / Products / Aluminum Gravity Casting
Main Products
Aluminum Gravity Casting
Permanent-mold and sand gravity casting for strong, pressure-tight aluminum parts.
- ISO 9001 certified
- DFM feedback in 48 h
- Machined & inspected in-house
Start a New Gravity Casting Quote
Upload Drawings & Get a QuoteSTEP · STP · IGES · X_T · DWG · DXF · PDF · ZIP
All uploads are secure and confidential.
Overview
Gravity (permanent mold) casting pours molten aluminum into reusable steel molds under gravity alone. The slow, controlled fill produces dense, heat-treatable castings with better mechanical properties than die casting — ideal for structural and pressure-tight parts at low to medium volumes.
Best suited for
- Structural brackets, housings and covers that need T6 heat treatment
- Pressure-tight pump, valve and compressor bodies
- Parts with sand cores for internal passages
- Annual volumes from a few hundred to tens of thousands of pieces
- Lower tooling cost than high-pressure die casting

Capabilities at a Glance
| Typical alloys | A356 / A356-T6, 319, 355, A413, ZL101, ZL104 (or equivalent EN AC-42100) |
|---|---|
| Mold type | Steel permanent mold, tilt-pour or static; sand cores where needed |
| Typical part weight | 0.2 – 30 kg (larger parts by sand casting) |
| As-cast tolerance | ISO 8062 CT7 – CT9 (typical for process) |
| Surface finish | Ra 3.2 – 12.5 µm as cast |
| Heat treatment | T5, T6, T7 |
| Secondary | CNC machining, impregnation, shot blasting, anodizing, powder coating, painting |
| Industries | Pump & compressor, hydraulics, agricultural equipment, lighting, electric motors, automotive aftermarket |
Tolerance and finish values are typical for the process; final values are confirmed per drawing.
Examples
Aluminum Gravity Casting Parts We Produce

Gearbox Housing
Thin-wall housing with bearing bores machined after T6 heat treatment.

Pump Cover
Flanged pump cover with machined sealing faces and threaded ports.

Mounting Bracket
Structural bracket replacing a welded steel assembly — lighter and lower cost.

Rotor Cage Housing
Cylindrical housing with ribbed windows and machined bores.
FAQ
When should I choose gravity casting over die casting?
Choose gravity casting when you need heat treatment (T6), pressure tightness, thicker walls or internal cored passages, or when annual volumes do not justify the higher cost of a die-casting die.
Can gravity castings be anodized?
Yes. Low-silicon alloys such as A356 anodize well. We recommend confirming cosmetic requirements early so we can control porosity on visible faces.
Other capabilities
Get a quote for aluminum gravity casting
Send your 2D drawing or 3D model. Our engineers review every RFQ and reply with DFM feedback and pricing within 48 hours.